Zebra LP2844

To Install Zebra LP2844

  1. Go to www.stoker.com/consignment/downloads.htm
  2. Click on the Zebra Printer
  3. Save the Printer to a familiar place e.g. MyDocuments
  4. Installation will take place, follow the Wizard

To set up your tags to print on the Zebra LP2844 printer:

  1. Click on your Start button in the lower left corner of your screen
  2. Click on your Control Panel
  3. Click on Printers and Faxes
  4. Right click on the Zebra LP2844 printer
  5. Click on Properties
  6. Click on Printing Preferences
  7. Click on Paper Output
  8. Click on Paper Size
  9. Click on Customize
  10. Click on New
  11. Type in the Name of your tag in the top field
  12. Change the Unit of Measurement to Inches
  13. Type in the correct width and height of your tag
  14. Click OK
  15. Click on Media Settings
  16. Make sure your Media Tracking is set to use either Label Marks or Label gaps. Choose whichever is correct for your tags.
  17. Click OK
  18. Click OK to exit out of the Printer Properties
  19. Exit out of Printers and Faxes and your Control Panel

Star SP200

To install Star SP200 printer using the Star SP212 Receipt driver

  1. Go to www.stoker.com/consignment/downloads.htm
  2. Click on StarSP200
  3. Select Save
  4. In the Save In drop down, choose MyDocuments
  5. Click Save
  6. When you see the Unzipper select the browse button
  7. Choose MyDocuments
  8. Click Unzip
  9. When it is finished Unzipping, close out of the Unzipper
  10. Right click on the Start button
  11. Click on Control Panel
  12. Double click on Printers and Faxes
  13. Click Add Printer
  14. Follow the steps until you have to select the manufacturer
  15. Click Have Disk
  16. Click Browse
  17. Click on the drop down arrow on the top and choose MyDocuments
  18. Double click on the Drivers Folder
  19. Double click on Win2000
  20. Double click on MiniDriver
  21. Double click on SP200
  22. Double click on SP200.INF
  23. From the drivers provided, scroll down until you see SP212 (Receipt)
  24. Select the SP212 Receipt
  25. Finish the Wizard (you will get a warning saying this driver has not passed Windows Logo Testing, that is OK)

To set up the Star SP200 printer:

  1. Click on your Start button in the lower left corner of your screen
  2. Click on your Control Panel
  3. Click on Printers and Faxes
  4. Right click on the Star SP 212 Receipt Printer (Please note: If your Star printer does not say SP212 Receipt, you have the wrong driver).
  5. Click Printing Preferences
  6. Extend the Document Options list
  7. Click on Media and set it to Cash Drawer #1
  8. Click Apply, if apply is not available, click OK
  9. Click on the Ports Tab
  10. Make sure you have the correct port chosen and click Configure Port
  11. Set the Flow Control to Hardware
  12. Click Apply, if apply is not available, click OK
  13. Click Apply on the Star SP212 Receipt Properties form. If apply is not available, click OK.
  14. Exit out of Printers and Faxes and your control panel

Cash Drawer

Connect your cash drawer to your Star SP200 printer. No additional requirements are necessary.

Scanner

If you did not order your scanner through Stoker Consignment, you must program your scanner to read "2 of 5 Interleaved Barcodes."

If you purchased your scanner through Stoker Consignment:

  1. Plug the Y cable into your keyboard port so that the long end connects to your computer and each short end connects to either your keyboard or your scanner.
  2. Go to Page 24 in your scanner manual.
  3. Scan the Start barcode at the bottom of the page.
  4. Scan the Enable 2 of 5 barcode at the top of the page.
  5. Turn the page in your manual.
  6. Scan the End or Finish barcode on the bottom of the page.

The Stoker Group, Inc.
6325 Gunpark Drive, Suite 101
Boulder, CO 80301

Copyright © 2002 by The Stoker Group, Inc. All rights reserved.
All specifications subject to change without notice.
The Stoker Group logo and Stoker Consignment Resale Software are trademarks of The Stoker Group, Inc.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.